We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Supported materials.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Supported materials(co) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Supported materials Product List

1～30 item / All 35 items

Displayed results
3D printing compatible material 'Stainless Steel | SLM'

3D printing compatible material 'Stainless Steel | SLM'

Due to its high tensile strength, heat resistance, and corrosion resistance, it can be used for various applications.

It is a stainless steel material called SUS316L. Due to its high tensile strength, excellent heat resistance, and corrosion resistance, it can be used for various applications. In 3D printing, it offers greater design freedom compared to traditional methods and is also suitable for mass production. It is built with a layer pitch of 0.04mm.

  • stainless
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'ASA | FDM'

3D printing compatible material 'ASA | FDM'

It is a 3D printing material that excels in three aspects: improved mechanical properties, beautiful appearance, and weather resistance, compared to ABS resin!

This is a weather-resistant material called ASA, which is produced using F900. While it has a chemical composition similar to ABS resin, it excels in three aspects: improved mechanical properties, beautiful appearance, and weather resistance compared to ABS resin. It is formed with a layer pitch of 0.254mm, but please contact us if you have a preferred layer pitch.

  • others
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'Antero800NA | FDM'

3D printing compatible material 'Antero800NA | FDM'

In addition to toughness and wear resistance, it has features such as high strength, high heat resistance, low gas emission characteristics, and excellent chemical resistance!

The material Antero 800NA, produced with the F900, is a PEKK-based material suitable for applications that require high durability and weight reduction. It features toughness and wear resistance, as well as high strength, high heat resistance, low gas emission characteristics, and excellent chemical resistance. It is built with a layer pitch of 0.254mm, but please contact us if you have a preferred layer pitch.

  • others
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'PP-Like | LSPc | NXE400'

3D printing compatible material 'PP-Like | LSPc | NXE400'

A PP-like material with properties equivalent to polypropylene, designed for ultra-fast molding!

This is a material called RHL-E-200, outputted with the NXE400. It is a PP-like material with properties equivalent to polypropylene, designed for ultra-fast 3D printing. Due to its high printing speed, it can be delivered relatively quickly compared to other materials. It is printed with a layer pitch of 0.1mm. When placing an order, you can choose between standard processing (with support) and support removal. Since the NXE400 includes physical supports, it is not possible to create interlocking parts.

  • others
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'Gray Resin | LSPc | NXE400'

3D printing compatible material 'Gray Resin | LSPc | NXE400'

This is a gray resin for ultra-fast molding that has the quality and strength equivalent to injection molding.

This is a material called xGPP-Gray, outputted from the NXE400. It is a gray resin for ultra-fast molding that possesses quality and strength comparable to injection molding. Due to its fast molding speed, it can be delivered relatively quickly compared to other handling materials. It is molded with a layer pitch of 0.1mm. When placing an order, you can choose between standard processing (with support) and support removal. Since the NXE400 includes physical support, it is not possible to create interlocking parts.

  • others
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'ULTEM1010 | FDM'

3D printing compatible material 'ULTEM1010 | FDM'

An FDM material with high heat resistance and the lowest thermal expansion coefficient among FDM materials, possessing the highest level of strength.

The material called ULTEM1010, which is outputted with F9F900, has high heat resistance and exhibits the lowest thermal expansion coefficient among FDM materials, making it a top-level strength FDM material. It complies with industry standards for biocompatibility according to ISO 10993 and USP Class VI, as well as NSF 51 food safety requirements. It is printed with a layer pitch of 0.254mm, but please contact us if you have a preferred layer pitch. *If the above certifications are required, we will guide you to the certified grade of FDM material called ULTEM1010 CG. Please indicate that compliance with various standards is necessary when inquiring.

  • others
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'Clear Acrylic | MJT'

3D printing compatible material 'Clear Acrylic | MJT'

AR-M2 is a transparent acrylic material with excellent toughness and rigidity. It is output using 3D printing! We are currently accepting commissioned modeling.

The material named AR-M2, outputted by AGILISTA, is a transparent acrylic material with excellent toughness and rigidity. It has a layer pitch of 20μm and a high precision tolerance of 0.1mm*, making it suitable for fitting parts. Due to its strength, it is suitable for functional prototypes, but it tends to show yellowing and layering more prominently. It is water-resistant and can accommodate small drilling, making it useful for functional prototypes such as shower heads. *The intersection is a guideline and may vary depending on the shape of the model. Tests conducted in compliance with the following standards have passed: 　REACH 　RoHS

  • others
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'ULTEM9085 | FDM'

3D printing compatible material 'ULTEM9085 | FDM'

It is a high-performance thermoplastic resin with flame retardant properties. It features a high strength-to-weight ratio, excellent heat resistance, and high impact resistance.

The material called ULTEM9085, produced with the F900, is a high-performance thermoplastic resin with excellent flame retardancy. It features a high strength-to-weight ratio, outstanding heat resistance, and high impact resistance. Additionally, it possesses excellent smoke density and toxicity (FST) characteristics. It has also received certification for high performance. It is manufactured with a layer pitch of 0.254mm, but please contact us if you have a preferred layer pitch. Due to its fast printing speed, it can be delivered relatively quickly compared to other materials. It is printed with a layer pitch of 0.1mm. You can choose between standard processing (with support) and support removal when placing your order. Since the NXE400 includes physical support, it is not possible to create interlocking parts.

  • others
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material "High-Precision Plastic"

3D printing compatible material "High-Precision Plastic"

Capable of reproducing high-precision and sharp edges! Suitable for drilling, tapping, and machining, and can also be used as parts for final products! Ideal for jigs!

This is a material called VisiJet(R) M2R-TN, produced using the ProJet(R) MJP 2500 Plus. It is built with a layer pitch of 32μm, allowing for high precision and sharp edge reproduction. Additionally, it features a smooth surface finish, making it suitable for painting and ideal for detailed railway model applications. In terms of mechanical properties, it is a plastic with excellent rigidity, capable of being drilled, tapped, and machined, and can also be used as parts for final products. The high-definition plastic has an ochre base color, but please note that areas where supports are attached will turn white due to support removal. Tests have been conducted in compliance with the following standards, and they have passed: USP Class VI.

  • plastic
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'High Heat Resistant Acrylic | MJT | AGILISTA'

3D printing compatible material 'High Heat Resistant Acrylic | MJT | AGILISTA'

It is a high heat-resistant acrylic material called AR-H1. Output via 3D printing! Accepting contract manufacturing inquiries.

This is a high-temperature acrylic material named AR-H1, outputted from AGILISTA. It can withstand heat up to 103°C at a load deflection temperature (0.45MPa), making it suitable for assembly with heat-generating components and for functional verification through hot air or hot water. The layer pitch is 20μm, with a tolerance of approximately 0.1mm*, making it suitable for high-precision parts such as fittings. It is water-resistant and can accommodate small drilling, which allows for its use in functional prototypes of showerheads. *The intersection is a guideline and may vary depending on the shape of the model. Tests conducted in compliance with the following standards have passed: REACH RoHS

  • others
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'Prototype Pro Resin | SLA'

3D printing compatible material 'Prototype Pro Resin | SLA'

【Material sample available】Despite its low price, it is an excellent material with outstanding durability and water resistance, as well as superior toughness and strength, making it often used for functional prototypes!

It is an inexpensive resin material that excels in durability and water resistance. Despite its low price, it has excellent toughness and strength, making it suitable for functional prototypes and more. It can be widely used not only for prototyping and functional testing but also for parts, tools, and components. In addition to the precision and smooth surface of photopolymer resin, it achieves short delivery times by manufacturing with a layer thickness of 0.1mm. This material is also suitable for mass production. ■ We have material samples available. If you would like a sample, please contact us and let us know your request for a sample. ■

  • 3D Printer
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'Aluminum'

3D printing compatible material 'Aluminum'

Post-processing such as polishing and plating is possible! A material suitable for part manufacturing.

DMM.make's 3D printing service provides total support for various manufacturing processes, from mass production assistance using molds to the creation of prototypes, utilizing 3D printers. We offer a wide range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. On this page, we will introduce "Aluminum," one of the selectable materials for 3D printing. This material is suitable for the production of parts through 3D printing. It uses an alloy called AlSi10Mg, which has properties equivalent to those of alloys commonly used in casting. Additionally, like standard aluminum die casting, it can undergo post-processing such as polishing and plating. 【Features】 - Material suitable for part production - Uses the alloy AlSi10Mg - Has properties equivalent to alloys commonly used in casting - Capable of post-processing such as polishing and plating Furthermore, DMM.make can also provide examples of achieving mass production without using molds by leveraging 3D printing technology. For more details, please check the materials or contact us using the information provided in the materials.

  • Contract manufacturing
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material "Carbon-infused material 'PA12CF'"

3D printing compatible material "Carbon-infused material 'PA12CF'"

Nylon blended with carbon fiber allows for the production of small, high-strength molded parts! It is a 3D printing material suitable for components and production jigs.

DMM.make 3D Printing Service provides total support for various manufacturing processes, from mass production assistance using molds without 3D printers to the creation of prototypes. We offer a wide range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. On this page, we will introduce the "Carbon Composite Material," which is one of the selectable materials for 3D printing. This material allows for the insertion of separate parts internally. Since nylon mixed with carbon fiber covers the outer shape, the exterior also has a black appearance. 【Features】 ■ Capable of outputting small items ■ Allows for the insertion of separate parts internally ■ Relatively high reproducibility with a pitch of 0.254mm ■ Use Cases Utilized for a wide range of applications, including as an alternative method for extrusion molding, casting, machining, injection molding, molds, and formwork, as well as for shaping small parts of IoT products and finished goods using 3D CAD data.

  • Contract manufacturing
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'Platinum'

3D printing compatible material 'Platinum'

Manufacturing PT900 platinum using the lost-wax casting method based on a mold created with a 3D printer.

DMM.make 3D printing service provides total support for various manufacturing processes, from mass production assistance using molds made with 3D printers to the creation of prototypes. We offer a range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. On this page, we introduce "Platinum," one of the selectable materials for 3D printing. This material is used to cast the 3D printed model into a mold, utilizing Pt900 platinum, which is actually used in accessories. The tip of the shape can be reproduced to a minimum width of about 0.8mm. 【Features】 ■ Capable of outputting small items ■ Uses Pt900 platinum, which is actually used in accessories Additionally, DMM.make can provide examples of achieving mass production without using molds by leveraging 3D printing technology. For more details, please check the materials or contact us using the information provided within the materials.

  • Contract manufacturing
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D Printing Compatible Material 'Low Hardness Silicone Rubber | MJT'

3D Printing Compatible Material 'Low Hardness Silicone Rubber | MJT'

It is a silicone-like rubber material called AR-G1L. Output via 3D printing! Accepting commissioned modeling.

This is a silicone-like rubber material called AR-G1L, outputted from AGILISTA. It has a Shore hardness (A) of 35. Due to the use of water-soluble support material, it is capable of creating intricate shapes. With a layer pitch of 30μm, it features high precision and takes advantage of the properties of highly elastic materials, making it suitable for reproducing flexible thin-walled structures that are prone to breakage and difficult to replicate with conventional rubber-like materials. The silicone rubber material can be applied to assembly evaluations of gaskets, grip feel checks, the production of soft jigs, and models of soft organs and blood vessels. *Shore hardness (A) is measured by the manufacturer based on JIS K6253. Tests conducted in compliance with the following standards have passed: - REACH - RoHS

  • others
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'Titanium'

3D printing compatible material 'Titanium'

It is possible to create shapes with the strength of metal parts! A material suitable for the production of parts and design items.

DMM.make 3D printing service provides total support for various manufacturing processes, from mass production assistance using molds to the creation of prototypes, utilizing 3D printers. We offer a wide range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. On this page, we will introduce 'Titanium,' one of the selectable materials for 3D printing. It possesses the general material characteristics of titanium, allowing for post-processing, making it ideal for many applications, including aerospace and medical fields. Although titanium is a difficult metal to machine, 3D printing allows for high design freedom and mass production. It is built with a layer pitch of 0.03mm. Tests conducted in compliance with the following standards have passed: - REACH - RoHS Additionally, DMM.make can provide examples of cases where mass production has been achieved without using molds, utilizing 3D printing technology. For more details, please check the materials or contact us using the information provided within the materials.

  • Contract manufacturing
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material "Brass"

3D printing compatible material "Brass"

Casting brass using a 3D printed model as a mold! A material suitable for making accessories.

DMM.make 3D printing service provides total support for various manufacturing processes, from mass production assistance using molds without 3D printers to the creation of prototypes. We offer a range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. On this page, we will introduce "brass," one of the selectable materials for 3D printing. This material is suitable for creating accessories through 3D printing. The tips of shapes can be reproduced to a minimum width of about 0.8mm. We create a mold from the 3D printed model and cast brass. We use brass materials that are actually utilized in accessories. [Features] - Material suitable for the production of accessories - Casting brass using a mold made from a 3D printed model (lost-wax method) - Uses brass materials that are actually used in accessories [Usage Examples] We utilize 3D CAD data for a wide range of applications, including extrusion molding, casting, machining, as an alternative method for injection molding, molds, and formwork, as well as for molding small parts for IoT products and finished goods.

  • Contract manufacturing
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'PA12GB Glass Beads | MJF'

3D printing compatible material 'PA12GB Glass Beads | MJF'

This is a nylon material that can be used in scenes where greater strength is required, as it contains glass beads.

This is a nylon material suitable for mass production that contains glass beads called HP 3D High Reusability PA 12 Glass Beads, made with the HP Jret Fusion 4200. The MJF method has no anisotropy compared to the SLS method, offering high strength and dimensional accuracy, making it usable from prototypes to final products. The inclusion of glass beads allows it to be utilized in scenarios where higher strength is required. It is built with a layer pitch of 0.08mm. Tests have been conducted in compliance with the following standards and have passed: - REACH - RoHS - PAHs

  • others
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D Printing Compatible Material 'High Hardness Silicone Rubber | MJT'

3D Printing Compatible Material 'High Hardness Silicone Rubber | MJT'

It is a silicone-like rubber material called AR-G1H. Output via 3D printing! Accepting commissioned modeling.

This is a silicone-like rubber material called AR-G1H, outputted from AGILISTA. It has a Shore hardness (A) of 65. Due to the use of water-soluble support material, it is capable of creating fine shapes. With a high resolution of 30μm layer pitch and the characteristics of a highly elastic material, it is also suitable for reproducing flexible thin-walled molded objects that are prone to damage and difficult to reproduce with conventional rubber-like materials. Thanks to the properties of high-hardness silicone rubber, it is often used for protective covers with bellows structures and for testing cover jigs. *Shore hardness (A) is measured by the manufacturer based on JIS K6253. Tests conducted in compliance with the following standards have passed: REACH RoHS

  • others
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material "Full Color Acrylic"

3D printing compatible material "Full Color Acrylic"

Due to the high strength of the material itself, tapping and secondary processing are also possible! A material suitable for figures and miniatures.

Introducing "Full Color Acrylic," a selectable material for 3D printing. This material is suitable for creating figures and miniatures through 3D printing. The shaping method used is full-color UV-curable inkjet. It allows for vibrant full-color modeling with over 10 million colors (600×300×800dpi). Compared to gypsum full color, it excels in reproducing fine designs and allows for flexible expressions. Additionally, secondary processing such as threading and tapping can be performed. 【Features】 ■ Material suitable for figures and miniatures ■ Shaping method: Full-color UV-curable inkjet ■ Excellent reproduction of fine designs ■ Flexible expressions possible ■ Use Cases It is widely used as an alternative method for extrusion molding, casting, machining, injection molding, molds, and formwork, as well as for shaping small parts of IoT products and finished goods using 3D CAD data.

  • Contract manufacturing
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'MJF'

3D printing compatible material 'MJF'

For small to medium lot production! It is possible to achieve strength that can withstand practical use without introducing anisotropy in the manufactured products.

DMM.make 3D printing service provides total support for various manufacturing processes, from mass production assistance using molds to the creation of prototypes, utilizing 3D printers. We offer a range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. On this page, we will introduce 'MJF,' one of the selectable materials for 3D printing. This material has strength approaching that of injection molding. Additionally, it does not require molds, eliminating mold costs. You can choose from four materials: "PA12," its reinforced version "PA12GB," the very flexible "PA11," and the weather-resistant white "PA12W." 【Features】 ■ Capable of outputting small items ■ Multi Jet Fusion technology ■ Strength approaching that of injection molding ■ No molds required ■ No mold costs ■ Suitable for small to medium lot production ■ Use Cases Utilized in a wide range of applications as an alternative method for extrusion molding, casting, machining, injection molding, molds, and formwork, as well as for molding small parts of IoT products and finished goods using 3D CAD data.

  • Contract manufacturing
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'Stainless Steel (SUS316L)'

3D printing compatible material 'Stainless Steel (SUS316L)'

Layered manufacturing with high-precision binder jetting! Capable of creating high-precision metal products through sintering.

DMM.make 3D printing service provides total support for various manufacturing processes, from mass production assistance using molds to the creation of prototypes, utilizing 3D printers. We offer a range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. On this page, we will introduce the selectable 3D printing material 'Stainless Steel (SUS316L)'. This material is capable of producing strong and high-precision metal products through layered construction using a high-precision binder jetting method, followed by sintering. The color is gray silver, which exhibits a metallic luster when polished. 【Features】 ■ Capable of outputting small items ■ Can produce strong and high-precision metal products Additionally, DMM.make can provide examples of achieving mass production without using molds by utilizing 3D printing technology. For more details, please check the materials or contact us using the information provided within the materials.

  • Contract manufacturing
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'Silver | Casting'

3D printing compatible material 'Silver | Casting'

A mold will be created based on 3D printed casting wax, and silver (SV925) will be cast.

DMM.make 3D printing service provides total support for various manufacturing processes, from mass production assistance using molds made with 3D printers to the creation of prototypes. We offer a wide range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. On this page, we will introduce the selectable material for 3D printing, 'Silver | Casting.' This material is used to cast the 3D printed model into a mold, using silver materials that are actually utilized in accessories and other products. The tip of the shape can be reproduced to a minimum width of approximately 0.8mm. 【Features】 ■ Capable of outputting small items ■ Uses silver materials that are actually used in accessories Additionally, DMM.make can provide examples of cases where 3D printing technology has been utilized to achieve mass production without the use of molds. ■ Usage Examples 3D CAD data is used for a wide range of applications, including extrusion molding, casting, machining, and as alternative methods for injection molding, molds, and formwork, as well as for shaping small parts of IoT products and finished goods.

  • Contract manufacturing
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'Economy Resin | SLA'

3D printing compatible material 'Economy Resin | SLA'

【Material sample available】This is a resin material that allows for large-scale modeling at a low cost. It is ideal for producing prototypes at an affordable price!

DMM.make 3D printing service provides total support for various manufacturing processes, from mass production assistance using molds with 3D printers to the creation of prototypes. We offer a range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. On this page, we introduce the selectable material for 3D printing, 'Economy Resin | SLA.' This is an inexpensive resin material suitable for large-scale modeling. It is ideal for creating prototypes at a low cost and can also be used for mass production. It is printed with a layer pitch of 0.05mm. ■ We have material samples available. If you would like a sample, please contact us and let us know your request for a sample. ■

  • 3D Printer
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible materials 'MJF PA12/PA12GB/PA11'

3D printing compatible materials 'MJF PA12/PA12GB/PA11'

Since dyeing can be performed and barrel polishing is also possible like nylon, it can be used for case housings and other applications.

DMM.make 3D printing service provides total support for various manufacturing processes, from mass production assistance using molds without 3D printers to the creation of prototypes. We offer a variety of materials, ranging from those with strength comparable to injection molding to softer materials like rubber and silicone. 'MJF PA12/PA12GB/PA11' boasts strength close to that of injection-molded products made from the same material due to its low anisotropy. It can be dyed and barrel polished like nylon, making it suitable for applications such as case housings. Additionally, using this material and the "HP Jet Fusion 3D 4200 printer," we support low-cost and low-risk mass production of products! We also offer mass production discounts for orders of more than 10 pieces. 【Features】 ■ Strength close to that of injection-molded products made from the same material due to low anisotropy ■ High practicality ■ Suitable for use in production, especially for interior components Furthermore, DMM.make can introduce examples of achieving mass production without molds using 3D printing technology. For more details, please check the materials or contact us using the information provided in the documents.

  • Other polymer materials
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'Acrylic (Xtreme Mode)'

3D printing compatible material 'Acrylic (Xtreme Mode)'

Reproduces the shape tip down to approximately 0.2mm at the minimum width! A 3D printing material suitable for the production of miniature and fine parts.

DMM.make 3D Printing Service provides total support for various manufacturing processes, from mass production assistance using molds without 3D printers to the creation of prototypes. We offer a wide range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. On this page, we introduce 'Acrylic (Xtreme Mode)', one of the selectable materials for 3D printing. This material is created using the Ultra High Definition mode of the HD3500MAX, with a layer pitch of 29μm, allowing for ultra-high precision modeling suitable for intricate and functional parts. 【Features】 - Material suitable for the production of miniatures and fine parts - Modeling using the Ultra High Definition mode of the HD3500MAX - Shape tip: Reproducible to a minimum width of approximately 0.2mm 【Usage Examples】 It is used for a wide range of applications, including as an alternative method for extrusion molding, casting, machining, injection molding, molds, and formwork, as well as for molding small parts of IoT products and finished goods using 3D CAD data.

  • Contract manufacturing
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material "Clear Acrylic"

3D printing compatible material "Clear Acrylic"

Increased transparency through polishing! A material suitable for making figures and accessories.

DMM.make 3D Printing Service provides total support for various manufacturing processes, from mass production assistance using molds to the creation of prototypes, utilizing 3D printers. We offer a variety of materials, ranging from those boasting strength comparable to injection molding to soft materials like rubber and silicone. On this page, we introduce 'Clear Acrylic,' one of the selectable materials for 3D printing. This material is suitable for the production of figures and accessories through 3D printing. Compared to translucent acrylic resin materials, it has greater transparency, and by polishing it, the clarity increases. The molding method is polyjet, resulting in a smooth surface. 【Features】 ■ Material suitable for the production of figures and accessories ■ Greater transparency compared to translucent acrylic resin materials ■ Clarity increases with polishing Additionally, DMM.make can provide examples of cases where mass production was achieved without using molds, utilizing 3D printing technology. For more details, please check the materials or contact us using the information provided within the documents.

  • Contract manufacturing
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'Gold | Casting'

3D printing compatible material 'Gold | Casting'

The shape's tip can be reproduced to a minimum width of about 0.8mm! It uses K18 gold.

DMM.make 3D printing service provides total support for various manufacturing processes, from mass production assistance using molds made with 3D printers to the creation of prototypes. We offer a wide range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. On this page, we introduce the selectable material for 3D printing, 'Gold | Casting.' This material is used to cast the 3D printed model into a mold, utilizing K18 gold, which is actually used in accessories. Please note that prices may change if there are significant fluctuations in the market. 【Features】 ■ Capable of outputting small items ■ Uses K18 gold, which is actually utilized in accessories Additionally, DMM.make can provide examples of cases where 3D printing technology has been used to achieve mass production without molds. ■ Usage Examples We utilize 3D CAD data for a wide range of applications, including extrusion molding, casting, machining, and as an alternative method for injection molding, molds, and formwork, as well as for shaping small parts for IoT products and finished goods.

  • Contract manufacturing
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material "AGILISTA"

3D printing compatible material "AGILISTA"

It can produce waterproof packing structures in one go, making it usable for various applications from mock-ups and prototypes to maintenance parts.

DMM.make 3D Printing Service provides comprehensive support for various manufacturing processes, from mass production assistance using molds to the creation of prototypes, utilizing 3D printers. We offer a range of materials, from those boasting strength comparable to injection molding to softer materials like rubber and silicone. This page introduces 'AGILISTA,' a selectable material for 3D printing. This material features a layer pitch of 20-30μm and includes four types of resins suitable for mock-ups. You can choose from transparent resins with excellent toughness and rigidity, high heat-resistant resins, low-hardness silicone rubber, and high-hardness options, depending on your application. 【Features】 ■ Capable of outputting small items ■ One-shot output for waterproof gasket structures ■ Layer pitch of 20-30μm ■ Four types suitable for mock-ups available ■ Use Cases We utilize 3D CAD data for a wide range of applications, including extrusion molding, casting, machining, and as alternative methods for injection molding, molds, and formwork, as well as for forming small parts for IoT products and finished goods.

  • Contract manufacturing
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
3D printing compatible material 'Agilus Rubber'

3D printing compatible material 'Agilus Rubber'

A material suitable for a wide range of applications that require a soft shape. It can output materials of different hardness in one go.

DMM.make 3D Printing Service provides total support for various manufacturing processes, from mass production assistance using molds without 3D printers to the creation of prototypes. We offer a wide range of materials, from those boasting strength comparable to injection molding to soft materials like rubber and silicone. On this page, we introduce 'Agilus Rubber,' one of the selectable materials for 3D printing. This material is a new rubber-like substance suitable for a wide range of applications that require soft shapes. Its Shore hardness is A30-35. Additionally, it can be used for surfaces that require anti-slip properties. The printing method is PolyJet, resulting in a smooth surface. 【Features】 ■ Capable of outputting small items ■ Shore hardness ranges from A30-90 ■ Usable for surfaces requiring anti-slip properties ■ The PolyJet printing method results in a smooth surface ■ Use Cases It is utilized in a wide range of applications, including as an alternative method for extrusion molding, casting, machining, injection molding, molds, and formwork, as well as for shaping small parts of IoT products and finished goods using 3D CAD data.

  • Contract manufacturing
  • Supported materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Supported materials

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.